Sprayons Spray Paints has a range of Thermocol Safe Spray Paints available in a variety of shades. We put them to test and the video here gives you an idea of how Sprayons does on thermocol!
Spray Paints are wonderful to use for all our decorative, finishing and industrial applications. Easy to use, not messy if used correctly and no special preparations needed. Take the cap off and start spraying! However, because of the aerosol and solvents present in the spray paints, they don’t work on thermocol or styrofoam. They end up eating the surface of the thermocol and dissolving the surface. So we took it upon ourselves to find a solution to this.
Sprayons Spray Paints has a range of Thermocol Safe Spray Paints available in a variety of shades. We put them to test and the video here gives you an idea of how Sprayons does on thermocol!
Hope you now have a solution to spray on thermocol! You can see all the different shades here.
A few tips while you use your Sprayons Thermocol Safe Spray Paints
- Make sure that the surface to be sprayed must be clean, dry and free of oil, grease, rust, dirt, dust or other surface contaminations.
- Do not use the spray paints on hot surfaces.
- For best results, shake the spray can vigorously for 2 to 3 minutes before use. After use, keep the spray can upside down. This will ensure consistent results the next time you use the spray paints.
- While spraying keep a distance of 15-25 cms from the surface. Spraying too close may result in bubbles, tears and sagging.
- For best results, spray 2 to 3 coats at an interval of 10-15 minutes in a dry environment.
- Clean the actuator with cloth. If the spray stops or is irregular, remove the actuator, clean with thinner and put it back.
- Use plastic primer spray paint prior to spraying on a plastic surface
- More the surface preparation, better will be the results!
You can shop for Sprayons at the BohriAli Megastore.
