A step by step guide to attain gloss or high gloss on the surface of your car. Polish your car with just a few materials and a little effort. Brought to you by BohriAli,
What do you need to Polish your Car: 
- Norton 2500 Grit Microfine Paper
- Norton Tack Cloth
- Norton One Step Hand Rubbing
- Norton Microfibre Cloth
- Sprayons Tyre Polish
- Norton Paste Wax (for High Gloss)
[maxbutton id=”6″]
How to Polish your Car?
Step 1: Wash the vehicle clean with water. The vehicle body to be polished should be free from dirt, grease and dust.
We have used Bosch AQT High Pressure Washer to have a good pre-cleanup before polishing.
Step 2: Soak the 2500 grit sand paper in water for five minutes. (For ease of use, cut the paper into 4 pieces if not cut already). Sand the vehicle lightly to cut the haze created. Do not apply too much uneven pressure.
Step 3: Wipe the car dry with the Norton Tack Cloth provided. This will ensure that the sand dust created by the sanding paper is cleant and your vehicle is dust and static free.
Step 4: Now, you will need to take the One Step Rubbing on your fingers and apply on various parts of the car. Make sure that you apply it in small quantities. Next, using a soft muslin cloth, rub the body of your vehicle in a circular motion until the scratch marks are removed and gloss is attained.
Step 5: Wipe the rubbed body part thoroughly with microfibre cloth to remove all the excess rubbing.
Step 6: Take some Tyre Polish on a cotton/muslin cloth and wipe the walls of the tyres thoroughly. Make sure that you do not apply it on your rims. It might have a damaging effect.
Step 7 (for High Gloss): Apply on body part with applicator provided. Keep the paste on the body for about 2 minutes , then rigorously rub and wipe off with microfibre cloth.
[maxbutton id=”6″]
5 comments for “How to Polish your Car”